Bianco RS6-IPRESSPRO Bianco Rainsaver Rainsaver MK6 & iPress Controller 240V (804708)

111$635.80 1111$443.00 111$443.00
Bianco RS6-IPRESSPRO Bianco Rainsaver Rainsaver MK6 & iPress Controller Technical Specifications Brand Bianco Rainsaver Product Type Pump Controller Suitable For Clean Water Bar 9.8 Bar Amps 16 Amps Hp 3.0...
SKU: RS6-IPRESSPRO
Description

Bianco RS6-IPRESSPRO Bianco Rainsaver Rainsaver MK6 & iPress Controller

Technical Specifications
Brand Bianco Rainsaver
Product Type Pump Controller
Suitable For Clean Water
Bar 9.8 Bar
Amps 16 Amps
Hp 3.0 Hp
Kilo Watts 2.2 kW
Port Size Inlet 1" BSPM Inlet
Port Size Outlet 1" BSPM outlet
Powered Electric
Warranty (months) 12 Months
Volts 240 V

 

Description
RS6-IPRESSPRO

Includes Bianco Rainsaver MK6 & iPress Controller

The RAINSAVERMK6 is an Automatic Rainwater / Mains Water Changeover Device designed to provide automatic mains back up for Pressure Pump supply systems. The RAINSAVERMK6 is designed to be installed in conjunction with a Pressure Pump supply system that is fitted with an independent pressure and flow controller with loss of prime protection and 24 hour auto restart.

Rainsaver MK6 General Specifications

Maximum water temperature (mains + pump): 40°C

Maximum recommended continuous pump flow: 120 l/m

Maximum recommended pump pressure: 1000 kPa Maximum recommended mains inlet pressure: 1000 kPa

No need for float switch.

2 year Rainsaver MK6 warranty

The BIA-iPRESS is a device used to control electric 240V pumps of 2.2kW or less. The controller monitors both the pressure and the flow and controls the operation of the pump automatically. Because of its design, there is no need for a separate pressure (expansion) tank, nor is there any need to adjust start and stop pressures as per traditional pressure switches.

The unit will protect the pump should the water supply entering the pump is stopped (either due to blockage in the pipe or tank running dry) and will automatically restart normal operation once water is restored.

Controller comes with a fully adjustable cut in (start) pressure of between 0.5-6.0 bar and a cut out (stop) pressure of between 0.8-9.8 bar. The iPRESS has the ability to operate as either a standard auto restart pressure controller (start pressure to be set) or a automatic restart loss of prime pressure switch (start and stop pressure to be set)

The new iPRESS controller combines the advantages of both a standard pressure switch and a typical electronic automatic restart controller

Click for SPEC SHEET

Contact Us