BIA-FERRO60MPCX PUMP SURFACE MOUNT CAST IRON WITH PRESSURE SWITCH CLEAN WATER 58L/MIN 45M0.6kW 240V

The pump is a self-priming surface mounted pressure system pump supplied with plug and play leads (IEC type) wired and ready to install. The self-priming ability provides excellent suction capacity of up to 9m. Used especially.

Electrical data:

• Rated voltage: 220 (-6%) -240V (+6%)
• Mains frequency: 50 Hz
• P2 (kW): 0.6 (Shaft Power)
• Current: 4.5 amps
• Capacitor: 12 uF
• Motor duty: Continuous
• Motor type: Asynchronous, TEFC
• Motor protection: In-built thermal overload
• Ingress protection: IP X4
• Insulation class: F
• Net weight: 17 kg

Hydraulic Data:

• Max Head: 45m
• Max Flow: 58 l/min
• Number taps: 4

The pump is characterised by:

• Automatic electronic pump control fitted and wired with plug and play leads so a licensed electrician is not required during installation.
• Includes fully electronic pump controller for automatic pump starting, stopping and restart after power loss and water loss.
• Run dry protection to prevent pump damage
• Automatic electronic control has in-built check valve to prevent water backflow through the pump.
• Cataphoresis1 treatment of pump body for rust prevention to ensure no water discoloration or suspended particles
• Corrosion resistant pump body, diffuser and impeller to ensure pump durability
• High quality mechanical shaft seal and high quality bearings
• 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.
• AS/NZS 4020 Drinking Water Approved for consumer peace of mind

Applications

Suitable for supplying water to domestic households. Also suitable for small scale garden irrigation.

Warranty (months) : 24 months