Heavy duty shredding and grinding ring at inlet. Centrifugal design, open impeller. Double Mechanical shaft seal in oil bath. Hard faced Silicon Carbide /Ceramic seal on pump side. Sand slinger lip seal for added protection. Oring casing sealing. Corrosive resistant stainless steel and quality heavy duty powder coated cast iron pump parts.
2 pole, 2900rpm 50Hz 240 volt single phase or 415 volt three phase. Submersible with IPx8 enclosure. 10 metre HO7RN-F oil resistant power lead and seal sensor lead fitted with bared wire lead ends for easy connection to power supply terminations. Class E insulation. Protected against both high operating temperatures and high current by a built in automa tically resetting thermal overload. • Able to pump soft organic solids, sanitary products, thin rubber products and even some textiles in suspension, by shredding to a slurry • Open impeller prevents blockage of the pump by small solids in the slurry • High heads and small solids allow connection to small discharge pipe systems, especially suited to pumping waste water to pressure sewer mains • Silent operation • Quick and easy installation • Hose tail supplied with every pump • Low maintenance • Fully repairable